Our Facility

Machinery & Equipment

OMIC R&D is home to a rapidly growing array of world-class machinery and equipment to serve our research and development projects. Our onsite facility capabilities include the following state-of-the-art milling and machining equipment.

WFL M80 MILLTURN

The 5-axis MILLTURN combines all machining and measuring operations into a single complete machining center. The turning-boring-milling unit with gearbox guarantees unparalleled cutting performance with the highest level of precision.

WFL M80 MILLTURN

WFL M80 MILLTURN

Technical Specifications:

  • 3000mm maximum cut length
  • 800mm maximum turning diameter
  • 80kW turning spindle power
  • 5860Nm turning spindle torque
  • 1600rpm max turning spindle speed
  • 58 kW milling spindle power
  • 640Nm turning spindle torque
  • 5000rpm max turning spindle speed
  • 1000 psi available coolant pressure

Okuma Genos M560V

The 3-axis Okuma vertical mill boasts a highly rigid, thermally stable construction that allows this vertical machining center to withstand thermal deformation resulting in reduced thermal growth and improved machining performance. It can handle a variety of materials — from titanium to aluminum — and does so without sacrificing finish quality or productivity.

Technical Specifications:

  • 41.34” x 22.05” x 18.11” maximum machining volume
  • 15,000rpm maximum spindle speed
  • 30hp milling spindle power
  • 1000 psi available coolant pressure with automatic flow rate adjusting
Okuma Genos M560V

Okuma Genos M560V

Doosan PUMA TT2500 SY

The 7-axis Doosan lathe is a high-performance turning center featuring first and second spindles that have the same power and capacity, with upper & lower turrets on the grounded box type bed. It is capable of simultaneous machining on two faces with both spindles and turrets and virtual realization of y-axis function which can double productivity.

Technical Specifications:

  • 13.8in maximum cut length
  • 15.4in maximum turning diameter
  • 34.9hp turning spindle power
  • 3500rpm max turning spindle speed
  • 10.1hp milling spindle power
  • 4000rpm max turning spindle speed
  • 1000 psi available coolant pressure with automatic flow rate adjusting
Doosan PUMA TT2500 SY

Doosan PUMA TT2500 SY

Sugino JCC 603 ROBO

The JCC 603 ROBO is the world’s first MAX 245MPa ultrahigh-pressure water jet enabling deburring of all material types including aluminum, steel, titanium and inconel alloys. A high-efficiency washing machine capable of transferring, washing and drying all in a single unit. The use of a highly rigid robotic hand helps reduce cycle time and space on the factory floor.

Technical Specifications:

  • 245MPa x 4L/min jet
Sugino JCC 603 ROBO

Sugino JCC 603 ROBO

​MTS Load Frame

The MTS uniaxial servo-hydraulic test system can perform a full range of tests reliably and efficiently, such as fatigue testing, fracture testing, monotonic testing and static/dynamic component testing.

Technical Specifications:

  • 22kip force range
MTS Load Frame

MTS Load Frame

WENZEL LH 1210 CMM

The Wenzel is a coordinate measurement machine with the newest generation air bearings capable of providing the highest performance in 3D measurement, integration with Renishaw heads, and keeping up with technology as its being developed, including contact and non-contact inspection methods.

Technical Specifications:

  • 1200mm x 3000mm x 1000mm measuring range
  • Renishaw REVO 2 head
  • Ability to inspect surface roughness

WENZEL LH 1210 CMM

WENZEL LH 1210 CMM

ZOLLER Titan

The >>titan<< is a high-end inspection and measuring machine with unrivaled flexibility and precision in the measurement of cutting tools. Seven CNC controlled axes measure any type of machine tool with high precision and full automation.

Technical Specifications:

  • 260mm diam x 400mm length operating envelope
  • Hundreds of measuring programs including the ability to measure edge hone
  • Tailstock center for measuring of tools between centers

ZOLLER >>Titan<<

ZOLLER >>Titan<<

ANCA TX7 Linear Grinder

The ANCA TX7 is a premium grinding machine, aimed at the most demanding and diverse applications. The TX Linear range is the new industry benchmark for production grinding and machining of cutting tools. With a large working envelope and powerful grinding spindle, the TX Linear range will deliver precision and productivity across the widest range of applications.

Technical Specifications:

  • 49hp Big Plus 40 direct drive spindle
  • 2 wheel changer pack for wheels up to 8”
  • Tool lengths up to 16” long and 12” in diameter
ANCA TX7 Linear Grinder

ANCA TX7 Linear Grinder

Oregon Manufacturing Innovation Center
Research & Development

33701 Charles T. Parker Way
Scappoose, OR 97056